SCR型低頻橡膠減震器安裝說明
SCR?Rubber shock absorber?Installation instructions
安裝前，請確�淞江集團橡膠減震器的型號和規格是否正確�
Before installation,make sure the model and the specification are correct.
安裝說明
Installation guide
所需工具：M10、M12、M16、M18、M20開口扳手�
Required tools：M10、M12、M16、M18、M20 open wrenches.
檢查附件是否齊全，橡膠減震器是否有缺陷或破損。（如圖1�
Check the isolator and other accessories see if they are all completely or having any defects.(Fig 1)
將橡膠減震器放到設備的安裝位置。（如圖2�
Place the isolator on the correct installation position.(Fig 2)
鎖緊螺母和墊片，確保設備和橡膠減震器固定到位。（如圖3�
Fasten the nuts and washers to ensure the equipment feet holes are fixed to the isolator.(Fig 3)
SCR型低頻橡膠減震器參數表：
SCR type rubber shock absorber parameter table:
�2）將橡膠減震器放到設備的安裝位置�
�1）檢查附件是否齊全，橡膠減震器是否有缺陷或破損�
Fig 1）Check the isolator and other accessories see if they are all completely or having any defects.
Fig 2）Place the isolator on the correct installation position.
�3）鎖緊螺母和墊片，確保設備和橡膠減震器固定到位�
Fig 3）Fasten the nuts and washers to ensure the equipment feet holes are fixed to the isolator.
點擊下載�
