STR型橡膠減震器安裝說明
STR?Rubber shock absorber?Installation instructions
安裝前，請確�淞江集團橡膠減震器的型號和規格是否正確�
Before installation,make sure the model and the specification are correct.
安裝說明
Installation guide
所需工具：公制口�17mm（M10）�19mm（M12）�24mm（M16）開口扳手�
Required tools�17mm（M10）�19mm（M12）�24mm（M16）open wrenches.
檢查附件是否齊全，橡膠減震器是否有缺陷或破損。（如圖1�
Check the isolator and other accessories see if they are all completely or having any defects.(Fig 1)
將橡膠減震器放到設備的安裝位置。（如圖2�
Place the isolator on the correct installation position.(Fig 2)
鎖緊螺母和墊片，確保設備和橡膠減震器固定到位。（如圖3�
Fasten the nuts and washers to ensure the equipment feet holes are fixed to the isolator.(Fig 3)
STR型橡膠減震器結構圖：
STR type rubber shock absorber Structure drawing:
STR型橡膠減震器參數表：
STR type rubber shock absorber parameter table:
| 型號 Model |
L (mm) |
W (mm) |
H (mm) |
CS (mm) |
A (mm) |
B （mm� |
載荷（kg� | |
| Min | Max | |||||||
| STR-100 | 95 | 53 | 48 | M10 | 77 | 10 | 50 | 150 |
| STR-130 | 127 | 77 | 70 | M12 | 101 | 14 | 150 | 450 |
| STR-180 | 180 | 118 | 70 | M16 | 149 | 14 | 450 | 1000 |
�1）檢查附件是否齊全，橡膠減震器是否有缺陷或破損�
Fig 1）Check the isolator and other accessories see if they are all completely or having any defects.
�2）將橡膠減震器放到設備的安裝位置�
Fig 2）Place the isolator on the correct installation position.
�3）鎖緊螺母和墊片，確保設備和橡膠減震器固定到位�
Fig 3）Fasten the nuts and washers to ensure the equipment feet holes are fixed to the isolator.
點擊下載�
